Comparison of the accuracy of implant position between 8 mm and 10 mm implant length placed by Computer Assisted Implant Surgery technique
Keywords:
accuracy of implant position, guided implant surgery, CAIS, 8 mm and 10 mm implant lengthAbstract
Objective: To compare the accuracy of implant placement in terms of deviations related to the virtual plan between 8 mm and 10 mm implant length placed by CAIS technique. Materials and methods: 24 single implants were randomly divided into two groups according to implant length (8 mm group and 10 mm group). Preoperative CBCT scan was taken using Accuitomo 3D machine. CoDiagnostiX software were used for virtual implant planning and template design. At the time of surgery, implant bed preparation and fully guided implant insertion were performed according to manufactural protocol. Postoperative CBCT scan were taken. coDiagnostiX software was used to measure the accuracy of implant. Results: The average deviations of axis were 3.18°±1.84° and 5.24°±1.25°, the average 3D deviations at platform were 1.14±0.60 mm and 1.27±0.60 mm, while, the average 3D deviations at apex were 1.39±0.63 mm and 1.90±0.51 mm for 8 mm-implant length group and 10 mm-implant length group respectively. Deviations of axis and 3D deviations at apex were significant different between groups. Conclusions: CAIS provides more accuracy of implant placement in 8 mm implant length compared with 10 mm length.
Keywords: accuracy of implant position, CAIS, 8 mm and 10 mm implant length
References
Behneke, A., Burwinkel, M., & Behneke, N. (2012). Factors influencing transfer accuracy of cone beam CT-derived template-based implant placement. Clin Oral Implants Res, 23(4), 416-423.
Bidra, A. S. (2010). Surgical and prosthodontic consequences of inadequate treatment planning for fixed implant-supported prosthesis in the edentulous mandible. Journal of Oral and Maxillofacial Surgery, 68(10), 2528-2536.
Bidra, A. S. (2011). Consequences of insufficient treatment planning for flapless implant surgery for a mandibular overdenture: a clinical report. J Prosthet Dent, 105(5), 286-291.
Block, M. S., Emery, R. W., Lank, K., & Ryan, J. (2017). Implant Placement Accuracy Using Dynamic Navigation. Int J Oral Maxillofac Implants, 32(1), 92-99.
Bover-Ramos, F., Vina-Almunia, J., Cervera-Ballester, J., Penarrocha-Diago, M., & Garcia-Mira, B. (2018). Accuracy of Implant Placement with Computer-Guided Surgery: A Systematic Review and Meta-Analysis Comparing Cadaver, Clinical, and In Vitro Studies. Int J Oral Maxillofac Implants, 33(1), 101-115.
Buser, D., Martin, W., & Belser, U. C. (2004). Optimizing esthetics for implant restorations in the anterior maxilla: anatomic and surgical considerations. Int J Oral Maxillofac Implants, 19(7), 43-61.
Cooper, L. F. (2016). Prosthodontic complications related to non-optimal dental implant placement. In S. J. Froum (Ed.), Dental Implant Complications: Etiology, Prevention, and Treatment, (pp. 539-558).
Ersoy, A. E., Turkyilmaz, I., Ozan, O., & McGlumphy, E. A. (2008). Reliability of implant placement with stereolithographic surgical guides generated from computed tomography: clinical data from 94 implants. J Periodontol, 79(8), 1339-1345.
Farley, N. E., Kennedy, K., McGlumphy, E. A., & Clelland, N. L. (2013). Split-mouth comparison of the accuracy of computer-generated and conventional surgical guides. Int J Oral Maxillofac Implants, 28(2), 563-572.
Fortin, T., Loup Coudert, J., Champleboux, G., Sautot, P., & Lavallée, S. (1995). Computer-assisted dental implant surgery using computed tomography. Journal of Image Guided Surgery, 1(1), 53-58.
Grunder, U., Gracis, S., & Capelli, M. (2005). Influence of the 3-D bone-to-implant relationship on esthetics. International Journal of Periodontics and Restorative Dentistry, 25(2).
Jung, R. E., Schneider, D., Ganeles, J., Wismeijer, D., Zwahlen, M., Hammerle, C. H., & Tahmaseb, A. (2009). Computer technology applications in surgical implant dentistry: a systematic review. Int J Oral Maxillofac Implants, 24 Suppl, 92-109.
Kiani, S., Razavi, S. M., Movahedian, B., & Khalesi, S. (2015). The Effect of Common Local and Systemic Conditions on Dental Implant Osseointegration: A Review of Literature. Avicenna J Dent Res., 7(2), e24339. doi:10.17795/ajdr-24339
Lee, C. K., & Agar, J. R. (2006). Surgical and prosthetic planning for a two-implant–retained mandibular overdenture: A clinical report. J Prosthet Dent, 95(2), 102-105.
Moraschini, V., Poubel, L. d. C., Ferreira, V., & dos SP Barboza, E. (2015). Evaluation of survival and success rates of dental implants reported in longitudinal studies with a follow-up period of at least 10 years: a systematic review. Int J Oral Maxillofac Implants, 44(3), 377-388.
Porter, J. A., & Von Fraunhofer, J. A. (2004). Success or failure of dental implants? A literature review with treatment considerations. Gen Dent., 53(6), 423-432.
Porwal, A., & Sasaki, K. (2013). Current status of the neutral zone: a literature review. J Prosthet Dent, 109(2), 129-134.
Ruppin, J., Popovic, A., Strauss, M., Spüntrup, E., Steiner, A., & Stoll, C. (2008). Evaluation of the accuracy of three different computer-aided surgery systems in dental implantology: optical tracking vs. stereolithographic splint systems. Clinical oral implants research, 19(7), 709-716.
Sicilia, A., & Botticelli, D. (2012). Computer guided implant therapy and soft and hard tissue aspects. The Third EAO Consensus Conference 2012. Clin Oral Implants Res, 23 Suppl 6, 157-161.
Somogyi-Ganss, E., Holmes, H. I., & Jokstad, A. (2015). Accuracy of a novel prototype dynamic computer-assisted surgery system. Clin Oral Implants Res, 26(8), 882-890.
Tahmaseb, A., Wismeijer, D., Coucke, W., & Derksen, W. (2014). Computer technology applications in surgical implant dentistry: a systematic review. Int J Oral Maxillofac Implants, 29, 25-42.
Tardieu, P. B., & Rosenfeld, A. L. (2009). The art of computer-guided implantology: Quintessence Pub.
Tarnow, D. P., Cho, S., & Wallace, S. (2000). The effect of inter-implant distance on the height of inter-implant bone crest. J Periodontol, 71(4), 546-549.
Van Assche, N., Vercruyssen, M., Coucke, W., Teughels, W., Jacobs, R., & Quirynen, M. (2012). Accuracy of computer-aided implant placement. Clin Oral Implants Res, 23 Suppl 6, 112-123.
Widmann, G., & Bale, R. J. (2006). Accuracy in computer-aided implant surgery--a review. Int J Oral Maxillofac Implants, 21(2), 305-313.
Bidra, A. S. (2010). Surgical and prosthodontic consequences of inadequate treatment planning for fixed implant-supported prosthesis in the edentulous mandible. Journal of Oral and Maxillofacial Surgery, 68(10), 2528-2536.
Bidra, A. S. (2011). Consequences of insufficient treatment planning for flapless implant surgery for a mandibular overdenture: a clinical report. J Prosthet Dent, 105(5), 286-291.
Block, M. S., Emery, R. W., Lank, K., & Ryan, J. (2017). Implant Placement Accuracy Using Dynamic Navigation. Int J Oral Maxillofac Implants, 32(1), 92-99.
Bover-Ramos, F., Vina-Almunia, J., Cervera-Ballester, J., Penarrocha-Diago, M., & Garcia-Mira, B. (2018). Accuracy of Implant Placement with Computer-Guided Surgery: A Systematic Review and Meta-Analysis Comparing Cadaver, Clinical, and In Vitro Studies. Int J Oral Maxillofac Implants, 33(1), 101-115.
Buser, D., Martin, W., & Belser, U. C. (2004). Optimizing esthetics for implant restorations in the anterior maxilla: anatomic and surgical considerations. Int J Oral Maxillofac Implants, 19(7), 43-61.
Cooper, L. F. (2016). Prosthodontic complications related to non-optimal dental implant placement. In S. J. Froum (Ed.), Dental Implant Complications: Etiology, Prevention, and Treatment, (pp. 539-558).
Ersoy, A. E., Turkyilmaz, I., Ozan, O., & McGlumphy, E. A. (2008). Reliability of implant placement with stereolithographic surgical guides generated from computed tomography: clinical data from 94 implants. J Periodontol, 79(8), 1339-1345.
Farley, N. E., Kennedy, K., McGlumphy, E. A., & Clelland, N. L. (2013). Split-mouth comparison of the accuracy of computer-generated and conventional surgical guides. Int J Oral Maxillofac Implants, 28(2), 563-572.
Fortin, T., Loup Coudert, J., Champleboux, G., Sautot, P., & Lavallée, S. (1995). Computer-assisted dental implant surgery using computed tomography. Journal of Image Guided Surgery, 1(1), 53-58.
Grunder, U., Gracis, S., & Capelli, M. (2005). Influence of the 3-D bone-to-implant relationship on esthetics. International Journal of Periodontics and Restorative Dentistry, 25(2).
Jung, R. E., Schneider, D., Ganeles, J., Wismeijer, D., Zwahlen, M., Hammerle, C. H., & Tahmaseb, A. (2009). Computer technology applications in surgical implant dentistry: a systematic review. Int J Oral Maxillofac Implants, 24 Suppl, 92-109.
Kiani, S., Razavi, S. M., Movahedian, B., & Khalesi, S. (2015). The Effect of Common Local and Systemic Conditions on Dental Implant Osseointegration: A Review of Literature. Avicenna J Dent Res., 7(2), e24339. doi:10.17795/ajdr-24339
Lee, C. K., & Agar, J. R. (2006). Surgical and prosthetic planning for a two-implant–retained mandibular overdenture: A clinical report. J Prosthet Dent, 95(2), 102-105.
Moraschini, V., Poubel, L. d. C., Ferreira, V., & dos SP Barboza, E. (2015). Evaluation of survival and success rates of dental implants reported in longitudinal studies with a follow-up period of at least 10 years: a systematic review. Int J Oral Maxillofac Implants, 44(3), 377-388.
Porter, J. A., & Von Fraunhofer, J. A. (2004). Success or failure of dental implants? A literature review with treatment considerations. Gen Dent., 53(6), 423-432.
Porwal, A., & Sasaki, K. (2013). Current status of the neutral zone: a literature review. J Prosthet Dent, 109(2), 129-134.
Ruppin, J., Popovic, A., Strauss, M., Spüntrup, E., Steiner, A., & Stoll, C. (2008). Evaluation of the accuracy of three different computer-aided surgery systems in dental implantology: optical tracking vs. stereolithographic splint systems. Clinical oral implants research, 19(7), 709-716.
Sicilia, A., & Botticelli, D. (2012). Computer guided implant therapy and soft and hard tissue aspects. The Third EAO Consensus Conference 2012. Clin Oral Implants Res, 23 Suppl 6, 157-161.
Somogyi-Ganss, E., Holmes, H. I., & Jokstad, A. (2015). Accuracy of a novel prototype dynamic computer-assisted surgery system. Clin Oral Implants Res, 26(8), 882-890.
Tahmaseb, A., Wismeijer, D., Coucke, W., & Derksen, W. (2014). Computer technology applications in surgical implant dentistry: a systematic review. Int J Oral Maxillofac Implants, 29, 25-42.
Tardieu, P. B., & Rosenfeld, A. L. (2009). The art of computer-guided implantology: Quintessence Pub.
Tarnow, D. P., Cho, S., & Wallace, S. (2000). The effect of inter-implant distance on the height of inter-implant bone crest. J Periodontol, 71(4), 546-549.
Van Assche, N., Vercruyssen, M., Coucke, W., Teughels, W., Jacobs, R., & Quirynen, M. (2012). Accuracy of computer-aided implant placement. Clin Oral Implants Res, 23 Suppl 6, 112-123.
Widmann, G., & Bale, R. J. (2006). Accuracy in computer-aided implant surgery--a review. Int J Oral Maxillofac Implants, 21(2), 305-313.
Downloads
Published
2019-05-19
Issue
Section
Research Articles
