สมบัติเชิงกลของมอนอลิธิคเซอร์โคเนียชนิดโปร่งแสงเปรียบเทียบกับลิเทียมไดซิลิเกต: การทบทวนอย่างเป็นระบบและการวิเคราะห์อภิมาน

ผู้แต่ง

  • พรนลัท เหมไพบูลย์ สถาบันทันตกรรม
  • กรรณิกา ชูเกียรติมั่น สถาบันทันตกรรม
  • สุมนา โพธิ์ศรีทอง สถาบันทันตกรรม

คำสำคัญ:

ลิเทียมไดซิลิเกต, คุณสมบัติเชิงกล, มอนอลิธิคเซอร์โคเนีย, เซอร์โคเนียชนิดโปร่งแสง

บทคัดย่อ

ภูมิหลัง: ปัจจุบันความต้องการด้านความงามทาง ทันตกรรมของผู้ป่วยเพิ่มขึ้น มอนอลิธิคเซอร์โคเนียชนิดโปร่งแสงจึงถูกพัฒนาขึ้นเป็นวัสดุทางเลือกในการบูรณะฟันที่ต้องการความสวยงามนอกเหนือไปจากลิเทียมไดซิลิเกต วัตถุประสงค์: เพื่อรวบรวมผลการศึกษาและวิเคราะห์อภิมานเรื่อง สมบัติเชิงกลของมอนอลิธิคเซอร์โคเนียชนิดโปร่งแสงเปรียบเทียบกับลิเทียมไดซิลิเกต วิธีการ: สืบค้นงานวิจัยที่เกี่ยวข้องอย่างเป็นระบบจาก ฐานข้อมูล PubMed, open access และ Google Scholar ร่วมกับการค้นหาด้วยมือ นำมาเฉพาะบทความภาษาอังกฤษหรือภาษาไทยตั้งแต่ ปี ค.ศ. 2011 ถึง ปี ค.ศ. 2021 และนำมาวิเคราะห์อภิมานเรื่องค่าความทนแรงดัด ความทนทานต่อการแตกหัก และความต้านทานต่อการแตกหักของวัสดุ จาก 11 บทความที่ได้รับการยอมรับ ผล: มอนอลิธิคเซอร์โคเนียชนิดโปร่งแสงมีความทนแรงดัดมากกว่าลิเทียมไดซิลิเกตอย่างมีนัยสำคัญทางสถิติ แต่อาจยังไม่สามารถสรุปได้ เนื่องจากข้อมูลขาดความเป็นเนื้อเดียวกันสูง (I2=97.8%) และพบว่า มอนอลิธิคเซอร์โคเนียชนิดโปร่งแสงมีความทนทานต่อการแตกหัก และความต้านทานต่อการแตกหักมากกว่าลิเทียมไดซิลิเกต อย่างมีนัยสำคัญทางสถิติ แต่อาจยังไม่สามารถสรุปได้ เนื่องจากข้อมูลขาดความเป็นเนื้อเดียวกันสูง (I2=96.3%, I2=86.9%) และการศึกษายังไม่มากพอ สรุป: มอนอลิธิคเซอร์โคเนียชนิดโปร่งแสง เป็นวัสดุทางเลือกในการใช้บูรณะฟันเพื่อความสวยงามในบริเวณที่ต้องรับแรงบดเคี้ยวสูงหรือผู้ป่วยที่มีนิสัยทำงานนอกหน้าที่ของระบบบดเคี้ยว แต่ยังคงต้องการการศึกษาที่มากขึ้น

References

Baldissara P, Wandscher VF, Marchionatti AME, Parisi C, Monaco C, Ciocca L. Translucency of IPS e.max and cubic zirconia monolithic crowns. J Prosthet Dent 2018;120(2):269-75.

Sen N, Isler S. Microstructural, physical, and optical characterization of high-translucency zirconia ceramics. J Prosthet Dent 2020;123(5):761-8.

Pieger S, Salman A, Bidra AS. Clinical outcomes of lithium disilicate single crowns and partial fixed dental prostheses: a systematic review. J Prosthet Dent 2014;112(1):22-30.

Makhija SK, Lawson NC, Gilbert GH, Litaker MS, McClelland JA, Louis DR, et al. Dentist material selection for single-unit crowns: findings from the National Dental Practice-Based Research Network. J Dent 2016;55:40-7.

Quinn JB, Sundar V, Lloyd IK. Influence of microstructure and chemistry on the fracture toughness of dental ceramics. Dental Materials 2003;19(7):603-11.

Brizuela-Velasco A, Dieguez-Pereira M, AlvarezArenal A, Chvarri-Prado D, Solaberrieta E, FernandezGonzalez FJ, et al. Fracture resistance of monolithic high translucency zirconia implant-supported crowns. Implant Dent 2016;25(5):624-8.

Ghodsi S, Jafarian Z. A review on translucent zirconia. Eur J Prosthodont Restor Dent 2018;26(2):62-74.

Stawarczyk B, Keul C, Eichberger M, Figge D, Edelhoff D, Lumkemann N. Three generations of zirconia: from veneered to monolithic. Part I. Quintessence Int 2017;48(5):369-80.

Elsayed A, Meyer G, Wille S, Kern M. Influence of the yttrium content on the fracture strength of monolithic zirconia crowns after artificial aging. Quintessence Int 2019;50(5):344-8.

Camposilvan E, Leone R, Gremillard L, Sorrentino R, Zarone F, Ferrari M, et al. Aging resistance, mechanical properties and translucency of different yttria-stabilized zirconia ceramics for monolithic dental crown applications. Dent Mater 2018;34(6):879-90.

Kontonasaki E, Giasimakopoulos P, Rigos AE. Strength and aging resistance of monolithic zirconia: an update to current knowledge. Jpn Dent Sci Rev 2020;56(1):1-23.

Nassary Zadeh P, Lumkemann N, Sener B, Eichberger M, Stawarczyk B. Flexural strength, fracture toughness, and translucency of cubic/tetragonal zirconia materials. J Prosthet Dent 2018;120(6):948-54.

Carrabba M, Keeling AJ, Aziz A, Vichi A, Fabian Fonzar R, Wood D, et al. Translucent zirconia in the ceramic scenario for monolithic restorations: A flexural strength and translucency comparison test. J Dent 2017;60:70-6.

Nossair S, Salah T, Ebeid K. Biaxial flexural strength of different types of monolithic zirconia. Brazilian Dental Science 2019;22:Process.

Mao L, Kaizer MR, Zhao M, Guo B, Song YF, Zhang Y. Graded ultra-translucent zirconia (5Y-PSZ) for strength and functionalities. J Dent Res 2018;97(11):1222-8.

Hemdan S, abd el-aziz s, El-Sharkwy Z. Comparative study between monolithic translucent zirconia (Y-TZP) and IPS empress 2 in marginal ft and fracture strength. AlAzhar Dental Journal for Girls 2019;6(4):391-9.

Zhang F, Reveron H, Spies BC, Van Meerbeek B, Chevalier J. Trade-off between fracture resistance and translucency of zirconia and lithium-disilicate glass ceramics for monolithic restorations. Acta Biomater 2019;91:24-34.

Sterne JA, Hernan MA, Reeves BC, Savovic J, Berkman ND, Viswanathan M, et al. ROBINS-I: a tool for assessing risk of bias in non-randomised studies of interventions. BMJ 2016;355:i4919.

Fathy SM, Al-Zordk W, M EG, M VS. Flexural strength and translucency characterization of aesthetic monolithic zirconia and relevance to clinical indications: A systematic review. Dent Mater 2021;37(4):711-30.

Gibbs CH, Anusavice KJ, Young HM, Jones JS, Esquivel Upshaw JF. Maximum clenching force of patients with moderate loss of posterior tooth support: a pilot study. J Prosthet Dent 2002;88(5):498-502.

Kim HK. Optical and mechanical properties of highly translucent dental zirconia. Materials (Basel) 2020;13(15).

Kwon SJ, Lawson NC, McLaren EE, Nejat AH, Burgess JO. Comparison of the mechanical properties of translucent zirconia and lithium disilicate. J Prosthet Dent 2018;120(1):132-7.

Holz L, Macias J, Vitorino N, Fernandes AJS, Costa FM, Almeida MM. Effect of Fe2O3 doping on colour and mechanical properties of Y-TZP ceramics. Ceramics International 2018;44(15):17962-71.

Jansen JU, Lumkemann N, Sener B, Stawarczyk B. Comparison of fracture toughness measurements for zirconia materials using two test methods. Dent Mater J 2019;38(5):806-12.

Jerman E, Lumkemann N, Eichberger M, Zoller C, Nothelfer S, Kienle A, et al. Evaluation of translucency, Marten’s hardness, biaxial flexural strength and fracture toughness of 3Y-TZP, 4Y-TZP and 5Y-TZP materials. Dent Mater 2021;37(2):212-22.

Downloads

เผยแพร่แล้ว

15-03-2024

How to Cite

1.
เหมไพบูลย์ พ, ชูเกียรติมั่น ก, โพธิ์ศรีทอง ส. สมบัติเชิงกลของมอนอลิธิคเซอร์โคเนียชนิดโปร่งแสงเปรียบเทียบกับลิเทียมไดซิลิเกต: การทบทวนอย่างเป็นระบบและการวิเคราะห์อภิมาน. J DMS [อินเทอร์เน็ต]. 15 มีนาคม 2024 [อ้างถึง 15 เมษายน 2025];49(1):29-38. available at: https://he02.tci-thaijo.org/index.php/JDMS/article/view/263065