The investigation on Quality of Infusion Pumps in Hospitals
Keywords:
investigation, infusion pumpsAbstract
During January to May 2014, the Bureau of Radiation and Medical Devices, Department of Medical Sciences investigated on quality of infusion pumps in 4 hospitals from 3 provinces; Sa Kaeo, Saraburi and Prachuap Khiri Khan. A total of 162 units were tested following Emergency Care Research Institute (ECRI) Procedure/Checklist 416-0595:1995 and International Electrotechnical Commission (IEC) 60601-2-24:1998. The requirements were battery, air in line, free flow protection, occlusion alarm and flow rate. The results showed that 107 units (66%) were compliance with standard and 55 units (34%) were non - compliance with standard. The cause of non - compliance were battery failure, flow rate error, air in line sensor failure, occlusion sensor failure and free flow protection failure. Infusion pumps are high risk medical devices because they are used to deliver medication directly into a patient, so hospitals and related organizations should test the quality of infusion pumps regularly for the safety of patients.
References
AS/NZS 3770: 1993. Guide to the safe use of infusion pumps and controllers. Homebush, Australia: Australian/New Zealand Standard (AS/NZS); 1993.
Webster JG, Editor. Encyclopedia of medical devices and instrumentation, capacitive microsensors for biomedical applications - drug infusion systems. 2nd ed. New York: John Wiley & Sons; 2006. p. 495-500.
ไทยแล็ปออนไลน์. น้ำเกลือ/Saline. [ออนไลน์]. 2557; [สืบค้น 11 มิ.ย. 2557]; [2 หน้า]. เข้าถึงได้จาก : URL: http://www.thailabonline.com/drug/drug1.htm
มหาวิทยาลัยมหิดล. ภาวะแทรกซ้อนจากการให้สารน้ำทางหลอดเลือดดำ. [ออนไลน์]. 2557; [สืบค้น 11 มิ.ย. 2557]; [5 หน้า]. เข้าถึงได้จาก : URL: http://student.mahidol.ac.th/~u4809211/page8.htm
Emergency Care Research Institute. Inspection and preventive maintenance system. 3rd ed. Pennsylvania, USA: ECRI; 1995.
International Electrotechnical Commission. Medical electrical equipment – Part 2-24: particular requirements for the safety of infusion pumps and controllers. (IEC 60601-2-24, 1998). Geneva, Switzerland: IEC; 1998.
กรมวิทยาศาสตร์การแพทย์ กระทรวงสาธารณสุข. คู่มือขั้นตอนการปฏิบัติงานมาตรฐานวิธีการทดสอบเครื่องควบคุมการให้สารละลายทางหลอดเลือดดำ. นนทบุรี : CD-Tech Design and Printing; 2557.
Downloads
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
