The result of thickness to bursting pressure and bursting volume of natural latex rubber condoms

Authors

  • Wanpen Duangsawang Bureau of Radiation and Medical Devices, Department of Medical Sciences
  • Supawan Chongthamawat Bureau of Radiation and Medical Devices, Department of Medical Sciences

Keywords:

condoms, thickness, bursting pressure, bursting volume

Abstract

       The study of thickness of natural latex rubber condoms to rubber strength and elongation was carried out by determination of bursting pressure and bursting volume. A total of 30 samples (nominal width 52 millimetres and 52.5 millimetres) were tested to confirm compliance with the requirements of Thai Industrial Standard (TIS) 625 B.E. 2554. Each sample was determinated the thickness by the mass method and determinated bursting pressure and bursting volume by Air Inflation Tester. The results showed that the bursting pressure was increased when thickness of condom increased, but thickness of condoms did not effect to bursting volume. However bursting pressure and bursting volume of all samples were accepted and complied with the standard. Condoms are developing to thinner condoms but safety with quality.

References

ประกาศกระทรวงอุตสาหกรรม ฉบับที่ 4390 (พ.ศ. 2554) ออกตามความในพระราชบัญญัติมาตรฐานผลิตภัณฑ์อุตสาหกรรม พ.ศ. 2511 ราชกิจจานุเบกษา เล่มที่ 129 ตอนพิเศษ 93 ง (ลงวันที่ 13 มิถุนายน 2555)

International Organization for Standardization. ISO 4074:2002/Cor 1:2003, Natural latex rubber condoms – Requirements and test methods. Geneva: ISO; 2003.

International Organization for Standardization. ISO 4074:2002/Cor 2:2008, Natural latex rubber condoms – Requirements and test methods. Geneva: ISO 2008.

World Health Organization. Male latex condom: specification, prequalification and guidelines for procurement, 2010. USA.: WHO; 2013. p. 32, 127.

ประกาศกระทรวงอุตสาหกรรม ฉบับที่ 4398 (พ.ศ. 2555) ออกตามความในพระราชบัญญัติมาตรฐานผลิตภัณฑ์อุตสาหกรรม พ.ศ. 2511 ราชกิจจานุเบกษา เล่มที่ 129 ตอนพิเศษ 97 ง (ลงวันที่ 20 มิถุนายน 2555)

International Organization for Standardization. ISO 2859-1:1999, Sampling procedures for inspection by attributes – Part 1: sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. Geneva: ISO; 1999.

Golombok S, Harding R, Sheldon J. An evaluation of a thicker versus a standard condom with gay men. AIDS 2001; 15(2): 245-50.

Downloads

Published

30-06-2014

How to Cite

1.
Duangsawang W, Chongthamawat S. The result of thickness to bursting pressure and bursting volume of natural latex rubber condoms. ว กรมวิทย พ [internet]. 2014 Jun. 30 [cited 2026 Feb. 5];56(2):83-90. available from: https://he02.tci-thaijo.org/index.php/dmsc/article/view/243391

Issue

Section

Original Articles